solar street light suppliers

The   100w led solar street light   is mainly composed of solar cell components, controllers, batteries, LED light sources, light poles and structural components. Install the lamp arm: Use thin iron wire to tie the exposed sheath wire ends of the upper and lower lamp poles tightly and wrap it with black tape. The thin iron wire drives the sheath wire to pass through the lamp arm assembly, and the lamp arm assembly gradually approaches the lower lamp pole until the panel on the lamp arm is aligned with the lamp arm boss on the lower lamp pole and is in close contact. When fixing the lamp arm assembly, avoid the sheath wire skin from being damaged or even cut due to the lamp arm assembly squeezing the sheath wire.   The street lamp pole cold galvanizing pot is to hang the workpiece that has also undergone degreasing and rust removal, showing no pollution and infiltration, on the cathode in the electroplating tank specially prepared with electrolyte, and the anode is zinc. C...

  Solar power street lamp   is a street lamp that realizes remote centralized control and management of street lamps through the application of advanced, efficient, and reliable power line carrier communication technology and wireless communication technology or current communication technology. Some of the street lamps have automatic brightness adjustment according to traffic flow. , Remote lighting control, active fault alarm, lamp cable anti-theft, remote meter reading, and other functions can greatly save power resources, improve the level of public lighting management, and save maintenance costs. It not only has the function of lighting but also adds many other functions. Advantages and performance. Having said so much, what are the special features of solar power street lamps?   It has been further improved in the way of lighting and can be controlled intelligently. Smart solar street lights adjust the brightness of the lights according to the traffic flow on the ro...

  Let's learn about what problems should be paid attention to when repairing   100w led solar street lights ?   1. First of all, it is necessary to reasonably determine the maintenance plan according to the quality of the whole lamp. The quality of solar street light fittings nowadays is very different. When repairing, it is necessary to analyze and diagnose the solar panel, solar street light battery, solar street light source, solar street light controller, etc., and the newly replaced parts should be designed to match the original system life. It can further reduce the number of maintenance, thereby reducing maintenance costs, especially the problem of solar street lights, most of the solar street lights are battery failure.   Although some solar street light sources are not broken, but because the quality of the LED chip is relatively poor, the light attenuation is large, and some have even begun to malfunction, it is better to replace the LED street light s...

  If you want  solar power street lamp   to have a long service life, but do not want the street lights to have light decay in a short time, then you should pay attention to these three points when you install the street lights in the early stage.   1. Installation location   When installing street lights, you should choose some suitable locations. At least make sure that the solar panel is open and free of any obstructions, otherwise, it will affect its photoelectric conversion efficiency, and you cannot choose a place with a backlight. You must ensure that the solar panel can be Accept normal light and ensure the duration of light.   In addition, although installing  solar power street lamp   does not need to dig a hole to bury cables like ordinary street lights, it still needs to dig a hole to make a cement base. Therefore, when installing a solar power street lamp, attention must be paid to avoid burying natural gas and other pipelines to prev...

  The   solar power street lamp  does not light up all day. Possible reasons include incorrect wiring, problem with the light source, short circuit of the line water inlet controller, and too long continuous rainy days. And we first need to check the solar power street lamp controller, look at the above logo, check whether the corresponding logo circuit is correctly connected, and then observe whether there is water rust on the terminal of the controller, if it is very likely the controller has been If it is damaged, measure the battery voltage. If the battery voltage of the 12V solar street light system is lower than 10.7V, the battery is out of service. Replace the battery. When there is light on a sunny day, check whether the solar panel has current and voltage output. If there is, the solar panel is normal, and if there is no solar panel, the solar panel is damaged. If the above problems do not exist, it is a problem with the light source of the led lamp. Connect the ...

Let's learn about what problems should be paid attention to when repairing  100w led solar street lights ?   1. First of all, it is necessary to reasonably determine the maintenance plan according to the quality of the whole lamp. The quality of solar street light fittings nowadays is very different. When repairing, it is necessary to analyze and diagnose the solar panel, solar street light battery, solar street light source, solar street light controller, etc., and the newly replaced parts should be designed to match the original system life. It can further reduce the number of maintenance, thereby reducing maintenance costs, especially the problem of solar street lights, most of the solar street lights are battery failure.   Although some solar street light sources are not broken, but because the quality of the LED chip is relatively poor, the light attenuation is large, and some have even begun to malfunction, it is better to replace the LED street light source, b...

Directly converting electrical energy into light energy,  street lights are also being continuously launched under the promotion of a low-carbon economy, but they have never changed. No matter how the style changes, its core parts remain the same. In recent years,  solar power street lamp s have been greatly popularized and promoted, but the fact is that many places have closed two or three years after being put into use, or need to be replaced before they can be reused. If this problem is not solved, the advantages of street lights will be completely lost. Therefore, useful life is a key element   Although the products and models of street lights are constantly changing, their configuration instructions and precautions will not change accordingly. In order to prolong the service life of street lights, the following four points need to be done:   1. Choose the right battery   The quality of solar cells directly affects the service life of street lights. Alt...